①Check if the adapter is plugged in.
②Make sure that the plug of the adapter matches the socket in your house and is inserted firmly. Please do not use it with a plug adapter.
①Press the power button and hold for 3 seconds to turn on the device.
②Keep the treatment window close to the skin until the light indicator bar turns green.
③The time interval from the finish of a flash to the start of the next is 1 to 3 seconds.
①The device will automatically turn off if not in use for 5 minutes after being turned on. In such case, turn it on again at any time.
②The device will automatically turn off after being used for over 30min. In such case, wait for 10min before you use it again to prevent from overheating.
③If in neither of the above cases, please contact us.
Turn off the device and turn it on again. If it doesn't work,please contact us for replacement.
①2-3 Times every week（Last for 1-4 weeks）：You will still see some hairs growing. These are likely to be hairs that were missed during treatment.
②1-2 Times every week（Last for 5-12weeks）：You should see a reduction in hair growth. However, many hairs may still not have been treated in their growth phase.
③Treatments as required：You should see a significant reduction in hairs within the treated area. Any remaining hairs should be finer and lighter in color.
①You have used a light intensity setting which is too low for you：Select a higher setting next time.
②You did not flash an area adjacent to an area you treated before：You have to release the flashes close to, but not overlapping, the previous spot.
③The device is not effective on your body hair color：If you have light blond, grey, red or white hair,the treatment is not effective.
④You do not use the device as often as recommended：To remove all hairs successfully, we advise you to follow the recommended treatment schedule.
⑤You respond more slowly to IPL treatment：Continue using the device for at least 6 months, as hair regrowth can still decrease over the course of this period.
Before and after use, use a q-tip to gently wipe the frame of the illumination head with alcohol.
Wipe the filter /Remove hair residue/ Lower gear
No, please refer to the precautions.
No, because the gel will contaminate the light outlet, affect the light sensitivity and the removal result. The correct way to use it is to shave the hair prior to using the device. Then apply the gel after hair removal for skincare.